MS in Mechanical Engineering (M.S.M.E.)
Degree Granting Department
Stephanie L. Carey, Ph.D.
Rajiv V. Dubey, Ph.D.
Kyle B. Reed, Ph.D.
Drive by wire, Motion cueing, Rehabilitation, Spinal Cord Injury, Virtual Reality
The ability to drive a car is an important skill for individuals with a spinal cord injury to maintain a high quality of life, particularly their freedom and independence. However, driving with a physical disability often requires the installation of an adaptive driving system to control steering, gas, and braking. The two main types of adaptive driving controls are mechanical and electrical, also known as drive by wire (DBW). DBW controls work by converting electric signals to mechanical actuators. Driving simulators are useful tools for adaptive driving systems because they allow users to test different control devices, to practice driving without the dangers of being on the road, and can be used as a safe way to evaluate disabled drivers. This study focused on the development of a dynamic driving simulator using DBW controls because many studies focus on mechanical controls and not DBW controls and often use static simulators.
The simulator was developed using the Computer Assisted Rehabilitation Environment (CAREN) virtual reality system. The CAREN system (Motek Medical, Amsterdam, Netherlands) includes a six degree of freedom (DOF) motion base, an optical motion capture system, a sound system, and a 180-degree projection screen. The two DBW controls, a lever device to control the gas and brake and a small wheel device to control steering, sent an electric signal to a Phidget microcontroller board, which interfaced with the CAREN system. Several different driving scenarios were created and imported into CAREN's D-Flow software. A program was developed in D-Flow to control the scene and motion of the platform appropriately based on the DBW controls via the Phidget. The CAREN system dynamically controlled the motion platform based on the user's input. For example, if the user applied the brake suddenly, the user felt a deceleration from the motion platform moving backwards. Human testing was performed and through the use of a survey, feedback about the system was obtained. Changes were made to the simulator using the feedback obtained and further testing showed that those changes improved the simulator. The driving simulator showed the capability to provide dynamic feedback and, therefore, may be more realistic and beneficial than current static adaptive driving simulators. The dynamic adaptive driving simulator developed may improve driving training and performance of persons with spinal cord injuries. Future work will include more human testing. The dynamic feedback provided through the system's moving platform and virtual camera movement will be optimized in order to perform similarly to a real car. Testing will also be completed with and without the dynamics from the moving platform to see how this type of feedback affects the user's driving ability in the virtual environment.
Scholar Commons Citation
Tudor, Sarah Marie, "The Development of an Adaptive Driving Simulator" (2015). Graduate Theses and Dissertations.