Graduation Year

2007

Document Type

Thesis

Degree

M.S.M.E.

Degree Granting Department

Mechanical Engineering

Major Professor

Frank Pyrtle, III, Ph.D.

Co-Major Professor

Muhammad M. Rahman, Ph.D.

Committee Member

Craig Lusk, Ph.D.

Keywords

Nanoparticles, Vertical heater, Mist Cooling, Microelectronics, Thermal Management

Abstract

Nanofluids have been demonstrated to be promising for heat transfer enhancement in forced convection and boiling applications. The addition of carbon, copper, and other high-thermal-conductivity material nanoparticles to water, oil, ethylene glycol, and other fluids has been determined to increase the thermal conductivities of these fluids. The increased effective thermal conductivities of these fluids enhance their abilities to dissipate heat in such applications. The use of nanofluids for spray cooling is an extension of the application of nanofluids for enhancement of heat dissipation.

In this investigation, experiments were performed to determine the level of heat transfer enhancement with the addition of alumina nanoparticles to the fluid. Using mass percentages of up to 0.5% alumina nanoparticles suspended in water, heat fluxes and surface temperatures were measured and compare. Compressed nitrogen was used to provide constant spray nozzle pressures to produce full-cone sprays in an open loop spray cooling system. The range of heat fluxes measured were for single-phase and phase-change spray cooling regimes.

Share

COinS