Integrated Planning and Image-Guided Control for Planar Needle Steering

Document Type

Conference Proceeding

Publication Date

2008

Digital Object Identifier (DOI)

https://doi.org/10.1109/BIOROB.2008.4762833

Abstract

Flexible, tip-steerable needles promise to enhance physicians' abilities to accurately reach targets and maneuver inside the human body while minimizing patient trauma. Here, we present a functional needle steering system that integrates two components: (1) a patient-specific 2D pre- and intraoperative planner that finds an achievable route to a target within a planar slice of tissue (Stochastic Motion Roadmap), and (2) a low-level image-guided feedback controller that keeps the needle tip within that slice. The planner generates a sequence of circular arcs that can be realized by interleaving pure insertions with 180deg; rotations of the needle shaft. This preplanned sequence is updated in realtime at regular intervals. Concurrently, the low-level image-based controller servos the needle to remain close to the desired plane between plan updates. Both planner and controller are predicated on a previously developed kinematic nonholonomic model of beveltip needle steering. We use slighly different needles here that have a small bend near the tip, so we extend the model to account for discontinuities of the tip position caused by 180 ° rotations. Further, during large rotations of the needle base, we maintain the desired tip angle by compensating for torsional compliance in the needle shaft, neglected in previous needle steering work. By integrating planning, control, and torsion compensation, we demonstrate both accurate targeting and obstacle avoidance.

Was this content written or created while at USF?

No

Citation / Publisher Attribution

2008 2nd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics, p. 819-824

Share

COinS